Operation Manual

F3 Pitch:
This calls up a new menu dedicated to controlling the tuning. The parameters available are the following:
F1 Tune: The value indicated in Hertz, that can be modified +/- 100 Cents using the VALUE +/- push buttons,
establishes the fine tuning of the whole sound generator of the VEGA. By pressing the two VALUE +/- push but-
tons together at the same time the standard tuning of 440 Hz is reset.
F2 Vibrato: When Off, it disables the vibrato on the timbres that use it. The sampled vibrato of some timbres
is not affected by the setting of this parameter.
F3 Portament: The value set using the VALUE +/- push buttons controls the Portamento velocity.
F4 Legato: This allows you to choose between Portamento, Legato and Mono by pressing F4 repeatedly. The
tied notes function is extremely interesting to simulate the phrasing of some traditional soloist instruments,
such as violins, trumpet, horn and trombone.
F5 Escape: This returns to the initial page of the Utility menu.
F6 Bend Valu: The value entered using the VALUE +/- push buttons establishes the excursion semitones of the
Pitch Bend Wheel.
F7 Bend LFO: This assigns the vibrato control created with the LFO to the Pitch Bend Wheel, the intensity of
which is established by the value that can be modified using the VALUE +/- push buttons.
F8 Bend DCF: This assigns the filter cut-off control to the Pitch Bend Wheel, the intensity of which is established
by the value that can be modified using the VALUE +/- push buttons.
F9 Bend DCA: This assigns the timbre amplitude control to the Pitch Bend Wheel, the intensity of which is estab-
lished by the value that can be modified using the VALUE +/- push buttons.
F4 Footswitch:
The VEGA can exploit two types of optional pedals (FS13 with thirteen switches and FS6 with six switches) to control
many functions, including those already available for the X series. F4 Footswitch calls up a page that shows the func-
tion assigned to each of the switches. To modify it, use the CURSOR +/- push buttons to select the pedal switch and
the VALUE +/- push buttons to modify the function assigned as desired, amongst the following:
VEGA
74
Sustain
Soft
Sostenuto
Arranger A
Arranger B
Arranger C
Arranger D
In./End. 1
In./End. 2
In./End. 3
Fill 1
Fill 2
Fill 3
Break
Start/Stop
Count In
Key Start
Key Stop
Tap Tempo
To End
Registr. Up
Registr. Down
Tempo +
Tempo -
minor
7th
m7th
5+
dim
Glide
Kick Off
Snare Off
Hi-Hat Off
Cymbal Off
Tom/Fx Off
Tamb. Off
Latin1 Off
Latin2 Off
Latin3 Off
Clap/Fx Off
Drum Lock
Bass Lock
Chords Lock
Fall Off
Shake
Overdrive
Delay
Wha-Wha
Chorus
Reverb
Distorsor
Text Page-
Text Page+
Vocalizer
Jump
Arabic_1
Arabic_2
Arabic_3
Arabic_4
Arabic_5
Arabic_6
Micro Dry
Fade Out
Crash
Voice Down
Voice Up
Harmony
Program
Swell
Transposer -
Transposer +
2nd Voice
Hold
Arabic_7
Arabic_8
Arabic_9
Arabic_10
Arabic_11
Arabic_12
Arabic_13
Left Drum
Interact.Arr
6th
7th+
Utility