Operation Manual

F2 MIDI In2/Computer: The same as F1 MIDI In 1. The setting also establishes the type of MIDI input used by

the Interface Computer.

F3 MIDI Out: This establishes which group of MIDI channels will be sent to MIDI Out.

F4 Computer Out: This establishes which group of MIDI channels will be sent to the Computer Interface.

F5 Escape: This returns to the initial page of the MIDI menu.

F6 Computer: This selects the type of computer to which the VEGA is connected.

F7 Local On/Off: This is a MIDI condition for which, when set as Off, all the VEGA sections are no longer con-

trolled by the keyboard but only by the MIDI In input.

CALLING UP THE PROGRAMS, THE ONE TOUCH MEMORIES AND THE REGISTRATIONS VIA MIDI

Program: Send the relative Program Change to the MIDI channel associated to the Right section. To assure good reception, before you send

the Program Change, ensure that the PROGRAM push button is enabled (LED lit).

One Touch: send the relative Program Change on the MIDI channel associated to the Right section. To assure good reception, before you send

the Program Change, ensure that the 1 TOUCH push button is enabled (LED lit).

Registration: Send the relative Program Change on the MIDI channel associated to the Registrations. The status of the REGISTRATION push

button is not important.

VEGA

MIDI