Operation Manual

KEYBOARD CONTROLS

The X series has been designed to meet the most demanding requirements of a live performance

and therefore has been implemented with a large number of keyboard controls that may be easily

activated by the user while playing in order to better control the expressiveness of the music.

Key Velocity

The instrument is equipped with a keyboard of 61 semi-weighted keys with Dynamics and After

Touch control. 6 Dynamic Curves are available: Soft 1, Soft 2, Normal, Hard 1, Hard 2, Fixed.

To change the dynamic response of the keyboard:

1 – Press key F 3 to gain access to the UTILITY Menu.

2 – The F10 key is pressed repeatedly to scroll the various types of dynamic Curves available.

The SOFT 2 curve is that set as the default parameter and the FIXED 127 curve corresponds to

dynamic cut-out. If the dynamic curve is to be changed permanently, this may be done using the

Power On Set Up function (see below). If on the other hand the activation of a different dynamic

curve is required only temporary, the Registration function may be used.

Power On Set Up

The function is used to change some original keyboard settings so that when the instrument is swit-

ched on the new values set by the user are always available.

The parameters that may be saved in the Power On Set Up mode are:

Style Custom/Factory (led) Portamento time Chord Mode

Style Bank A/B (led) Equalizer Dynamic Arranger

Pattern (led) Separate Out Assignment Autocrash

1 Touch (led) Accordion Mode Pedalboard Font 1-2 text lyric

Global transposer Lower 1 Hold Bass to Lower 4 switch mode

Split point Lower 2 Hold Reverb Lock

Reverb Level Lower Lock Sync time

Harmony type Bass Lock Canali Gm Tx-Rx

Dynamic Curve Pianist Sustain Sustain 2nd voice

Global Tune Swell to right Arabic mode

To save the new Set Up:

1 Press the Save / Enter key.

2 Press the F3 key - Power On set Up.

3 Press key F10 - Save to confirm the entry.

The Default function - F9 is used to restore the original Power On conditions set by the manufacturer.

SOUNDBANK AUTOLOADING

This function allows you to load a Sound Bank when the instrument is switched on.

1 Press Disk

2 Select the folder containing the SoundBank you wish to load

3 Select the first file of the Soundbank

4 Press the Save/Enter button. A new configuration file called INITXX.PWR will be saved

onto disk, which contains all the information on the Sound bank.

5 Go back to the main display screen and Press the Save/Enter button

6 Press F3 Power On Setup