Operation Manual

When the instrument is switched on, the file InitXX.Pwr will be opened and the selected

Soundbank will automatically be loaded.

Press on the Exit button during the AutoLoading operation to cancel the latter and go back to the

main display screen.

HARMONY

This function adds grace or complementary notes to the melody based on the chords achieved on the

Arranger part.

To gain access to the Harmony functions:

1 Press the Harmony key.

Use the F 1 – F 9 keys to select the available effects.

The instrument is provided with the following types of harmonies:

CLOSE 1: the notes of the chord played on the left hand section are repeated on the right hand sec-

tion and summed to song line.

CLOSE 2: like Close 2, but with a more complex and differentiated harmonization, depending on

the key played.

DOUBLE UP: adds the higher octave to the song.

DOUBLE DOWN: adds the lower octave to the song.

5TH: adds the higher fifth octave to the song.

8 + 5th: adds the lower octave and fifth to the song.

TRILL: to achieve this effect at least 2 notes must be played on the Song part.

The 2 notes are automatically repeated one after the other.

The repeating velocity is controlled with the Speed function - F9.

REPEAT: repeating effect on the individual note played.

The Repeat Time is synchronized with the standard Time of the Styles and quantified according to

the various types of Speed available.

SPEED: velocity control for the Trill and Repeat effects.

The Velocity values are: 4, 6, 8, 12, 16, 24, 32.

TRANSPOSER

The Transposer function enables the global transposing

of the general tuning of the instrument.

To gain access to the transposer function simply press one of the 2 Cursor / Transposer < > keys.

" GLOBAL TRANSPOSER " will appear on the display

for approximately 2 seconds during which time the transposition of the instrument may be modi-

fied using the 2 Cursor / Transposer < > keys.

The max. transposition permissible is + / - 24 semitones.

The new transposition value remains on the main display next to “Transp”.

To restore normal Tuning conditions ( or rather

transposition 0 ) simply press the 2 Cursor / Transposer < > keys at the same time.

SPLIT

The Split function is used to establish which part of the keyboard is assigned to the Arranger and

which to the melody part. The normal condition is C3.

To modify the Split:

1 Press and hold down the Split key.