Operation Manual

Intro these will be performed one after the other.
Intro / Ending: the Arranger foresee 3 Intro’s and 3 Ending’s. The Intro 1 / Ending 1 are mostly
programmed without changing the tuning therefore the user may resolve the harmony as desi-
red. Intro / Ending 2 and 3 are on the other hand programmed with harmony variations within
and therefore it is inadvisable to change the tuning while they are playing. After the Intro the
Arranger is pre-arranged always on Arrange A, unless a different Arrange is selected during the
Intro.
Fade Out: the Fade out enables the “fading out” effect, or rather the gradual decrease in the general
instrument Volume down to zero.
Lock: The Lock function is used to block the arrangement of the Drum, Bass and Chords section in
a differentiated manner so that when switching over to one Arrange to the other the pattern of
that section remains unaltered. This function allows the user to arrange the Style as preferred
creating original combinations amongst the various Arrangers. To activate the Lock function
simply select Arranger first and then press the DRUM, BASS or CHORDS keys depending on the
section to be locked.
When changing the various Arrange you will notice that the section with the Lock enabled will not
be affected.
PIANIST: The Pianist function automatically modifies the keyboard split and transforms it into one
single piano type keyboard. In this condition the Automatic Arrangement can be controlled
playing the keyboard with two hands. There are two Pianist operating modes available: Auto
and Standard. To select them, press F3 – Utility, Page > and then F5 Auto – Standard.
Auto: This mode is selected by default. In the Auto mode, it is sufficient to play a chord of at least 3
notes on any keyboard area. As soon as this chord has been recognised, it is possible to play the
lead with one or two notes on the piano, whereas the automatic accompaniment continues
playing the last chord pressed.
Standard: The Standard mode is selected by means of the Sustain Pedal. If the Sustain Pedal is
pressed immediately after having played a chord on the keyboard, the Arrangement will remain
stored with this specific chord as long as the Sustain pedal remains pressed.
Pianist Sustain: This function is used to activate or deactivate the Sustain effect on the pedal while
the Pianist mode is inserted. To select this function, press F4-Arrange Mode, Page > and then F7.
Manual Bass: this function allows the user to play the Bass manually. Each time the manual Bass is
enabled the 2 Lower Chords and the entire Arrangement are cut out.
31