Operation Manual

XD9-XD3
25
SAVING AND LOADING A PROGRAM
Once a Program has been modified or programmed, it must be saved in the memory or on disk for future recall or use. It is advisable to save
your favourite programs in RAM due to the fact that these are immediately available and can be recalled instantaneously. Programs which reside
in DISK have to be loaded into RAM prior to being used.
PPRROOCCEEEEDD AASS FFOOLLLLOOWWSS TTOO SSAAVVEE AA SSIINNGGLLEE PPRROOGGRRAAMM IINN RRAAMM
●
Select the program to be saved.
●
Access the
EEddiitt PPrrooggrraamm
environment by pressing the function push button relative to the Program selected once again or from the main
page of the display by pressing
FF88 EEddiitt PPrrooggrraamm..
●
Press
SSAAVVEE
/
EENNTTEERR
. The page that appears will show the destination memory location that can be modified by entering the number with the
SSTTYYLLEE
push-buttons and the name to be assigned to the Program using the keys of the keyboard.
●
Confirm that the program is to be saved using
FF1100 SSaavvee
. Press
FF55 EEssccaappee
to annul the operation.
PPRROOCCEEEEDD AASS FFOOLLLLOOWWSS TTOO SSAAVVEE AA SSIINNGGLLEE PPRROOGGRRAAMM OONN DDIISSKK
●
Press
DDIISSKK
and select the destination disk on which the Program is to be saved, using the
PPAAGGEE
+/- push buttons. If you have selected the
hard disk, also select the destination folder.
●
Repeat the procedure given for saving in RAM up to the
SSAAVVEE
/
EENNTTEERR
page.
●
Enable saving on disk using
FF99 SSaavvee TToo DDiisskk..
●
Confirm the procedure using
FF1100 EExxeecc
, or cancel using
FF55 EEssccaappee
.
●
When the Program to be saved on disk has the same name as a Program that already exists, the display shows three options, namely:
FF55 NNaammee
this is used to give a new name to the Program and then to confirm that it is to be saved using
FF1100 EExxeecc
1100 OOvveerrwwrriittee
this enables saving by cancelling and overwriting the Program that already exists on disk.
FF44 DDiirr
this displays the disk directory enabling the user to control the names that already exist. The user can only return to the sav-
ing on disk page from the directory by exiting (pressing
EEXXIITT))
and therefore repeating the procedure just described. In this case all
the modifications made to the Program will be stored in volatile memory.
PPRROOCCEEEEDD AASS FFOOLLLLOOWWSS TTOO LLOOAADD AA SSIINNGGLLEE PPRROOGGRRAAMM FFRROOMM DDIISSKK
●
Press the
DDIISSKK
push button.
●
Choose from which disk the program is to be loaded using the
PPAAGGEE
+/- push buttons.
●
Select the type of file to be loaded using
FF55 FFiillee CChhooiiccee..
●
Select
FF22 SSiinnggllee PPrrooggrraamm
or
FF77 PPrrooggrraamm
to load a complete bank.
●
Type in the number of the folder in which the Single Programs to be loaded are stored using the numeric keypad (
SSTTYYLLEESS
push buttons).
●
Select the Program using the
VVAALLUUEE
+/- push buttons.
●
Press
FF22 LLooaadd
.
Program and One Touch