Operation Manual

XD9-XD3

F9 Effects: When enabled (On), the effects will be applied to the microphone input, whereas when set to Dry no Reverb effect is sent

to the microphone input. If Dry On Stop is selected, the effects will be applied on the microphone signal only when the

Arranger or a Midi file is being played. After the Arranger and the Midi file have stopped playing, the XD9 disables the

effects on the microphone and re-enables them as soon as the Arranger or the Midi file starts playing again. Dry On

Stop solves an important problem the musician has to cope with: the need to exclude the effects from the microphone

signal when he talks to the public (e.g. when introducing the next song).

F10 Active/Inactive: This enables or disables the microphone inputs. If they are connected but not being used, it is a good rule to disable the

inputs to avoid disturbing noises.

Using the microphone