Operation Manual

XD9-XD3
87
Once you have chosen the Folder, you can return to the Floppy Disk using the PAGE +/- push buttons for the next steps.
First of all, select the files to be copied using the following buttons:
●
VALUE +/- to go from one file to the next within those displayed.
●
CURSOR +/- to go to the next group of files, if they exist.
●
F10 Select to confirm the files to be copied, next to which an arrow appears to confirm that the selection has taken place.
Pressing both VALUE +/- buttons at the same time selects all files present on the floppy disk.
If there are many files with different extensions on the floppy disk, function F5 File Choice can become very useful: this function opens a page
from where you may select, using the relevant function buttons, the type of file to display among the different types present.
Note: Remember that you have to select ‘Pattern’ and not’ Custom Styles’ to load a Style.
Once you have selected the files to copy, press F3 Copy to start the operation. The page that appears now displays the original file (Copy) and
the final disk destination (From To).
In the centre of the display the name of the first file selected appears. This can be modified using the keyboard keys and the CURSOR +/- but-
tons. You may copy each single file confirming the copy operation each time by pressing F10 Execute. If you have not modified the name, the
copied file will have the same name as the original one. At the end of the copy operation, the next file among those selected will appear. If a
number of files has been selected, you may skip the current file and go to the next one pressing F8 Skip. Pressing F9 Copy All copies all the
selected files which will maintain their original name. Pressing F9 Escape exits this page at any time, even if just some of the selected files
have been copied.
COPYING FROM HARD DISK TO FLOPPY
Once you have inserted the Floppy Disk with sufficient free space in the Disk drive, you may find the Folder from which the files are to be copied
within the Hard Disk using the following procedure:
Enable the Disk menu using the dedicated push button.
Select the Folder by typing in its number using the numeric keypad (STYLES push buttons).
If you do not know the number associated with the Folder, press F8 Folder to display the list of all the Folders stored in the Hard Disk, then
choose that required using the numeric keypad and return to the previous page using F5 Escape.
You can only select one type of file amongst those displayed using F5 File Choice and the relative function push buttons.
First of all, select the files to be copied using the following buttons:
●
VALUE +/- to go from one file to the next within those displayed.
●
CURSOR +/- to go to the next group of files, if existent.
●
F10 Select to confirm the files to be copied, next to which an arrow appears to confirm that the selection has taken place.
Pressing both VALUE +/- buttons at the same time selects all files contained in the folder.
Once you have selected the files to copy, press F4 Copy to start the operation. The page that appears now displays the original file (Copy) and
the final destination disk (From To) and includes a number of options.
In the centre of the display the name of the first file selected appears. This can be modified using the keyboard keys and the CURSOR +/- but-
tons. You may copy each single file confirming the copy operation each time by pressing F10 Execute. If you have not modified the name, the
copied file will have the same name as the original one. At the end of the copy operation, the next file among those selected will appear. If a
number of files has been selected, you may skip the current file and go to the next one pressing F8 Skip.
Pressing F9 Copy All copies all the selected files which will maintain their original name.
Pressing F9 Escape exits this page at any time, even if just some of the selected files have been copied.
F5 Files Choice: This is used to select the file type within the Folder currently in use. The options are the same as those indicated in F3 Save.
F6 Delete: This cancels one or a number of files selected using F10 Select. Before completing the procedure the XD9 displays a warning
message with the following options:
F5 Escape: This cancels the procedure.
F10 Exec: This confirms the procedure.
DISK