Full Product Manual

Installing the Smokenator®
Start with a clean kettle grill and lid, make sure the interior
of the kettle top is brushed clean of accumulated smoke
flakes. Keep the lower part of the kettle free of accumulated
smoke residue, ash, and soot.
Arrange the coal support grill (the lower grill grate) so that
the base of the baffle fits in between the main rods of the
coal support grill. On the Smokenator 1000 and 2600, the
top outer edge of the Smokenator is supported by two of
the upper cooking grill’s support tabs. Arrange the baffle so
that the bent tabs of the baffle are positioned directly over
the kettle tabs that are used to support the cooking grill.
This allows the baffle to be lightly secured to the kettle.
Smokenator 180 and 180J do not have support tabs and
just rests in place against the side of the kettle base).