Operation Manual

ning interruption. The training data achieved is displayed.

Speed, exertion, revolutions and pulse are displayed as

average values with the Ø -symbol with a "Plus" or

"Minus" change in the current display, e.g. rest values.

The training data is displayed for 4 minutes. If you do not

press any keys during this period and do not train, the

electronics switch into the snooze mode with the room

temperature is displayed.

Training Resumption

If training is continued within 4 minutes the last values are

counted further or downwards.

RECOVERY – Function

Recovery Pulse Measurement

At the end of training press "RECOVERY".

The electronics measure your pulse for the last 60 seconds

retrospectively.

If you press "RECOVERY", the current pulse value is saved

under "RPM" and the pulse value is saved after 60

seconds under "SPEED". "DISTANCE" displays the diffe-

rence between the two values.

This results in a fitness mark (Example F 2.6). The display

stops after 20 seconds.

“RECOVERY” or “RESET” interrupts the function

If no pulse is recorded at the start or end of the time peri-

od, an error message is displayed.

Comment