Operation Manual

RECOVERY – Function
Recovery pulse measurement
At the end of training press “RECOVERY”.
The electronic equipment measures your pulse reversing
for 60 seconds.
If you press “RECOVERY”, the current pulse value is stored
under “RPM”; under “SPEED”, the pulse value after 60
seconds is stored. Under “Power”, the difference of both
values is displayed. From this, a fitness grade is calcula-
ted (for example F 1.1). The display is ended after 20
seconds.
“RECOVERY” or “RESET” interrupts the function. If at the
beginning or end of the time rewind no pulse is recorded,
an error message is displayed.
29
GB
Exceeding
Value / Input % MAX
Maximum pulse 80-210
✔ +1 +1 +1
Off
Target pulse
Fat burning 65%
or Fitness 75% ✔ +11 –11*
or Manual 40-90%
Target pulse 40-200 +11 –11*
*Comment: appears only if the target pulse was achieved once
}
Display for pulse events
For undercutting the entered target
pulse (-11 beats), the symbol "LO" is
displayed.
For exceeding (+11 beats), the sym-
bol "HI" is displayed.
For exceeding the maximum pulse, the
"HI" arrow is blinking and the lette-
ring "MAX" is displayed.
Training Stillstand
Load ✔✔
Profile ✔✔✔✔✔✔
Time ✔✔
Energy ✔✔
Distance ✔✔
Max. Pulse ✔✔✔✔✔✔✔✔✔✔
or
Fat burning 65%
or Fitness 75% ✔✔ ✔ ✔
or Manual 40-90%
Target pulse 40-200 ✔✔ ✔✔
Time/Distance switchover ✔✔✔✔✔✔
Recovery ✔✔✔✔✔✔✔✔✔ ✔
Entries and functions
Load
Profile