Operation Manual

12 Owner’s Manual
SPEED ADJUSTMENTS
FAST and SLOW will adjust speed by increments of 0.1Km/H during workout. Or you may hold
these buttons to ramp up or down.
ELEVATION ADJUSTMENTS
For safety reasons, elevation is designed to be manually adjusted only. At no time will treadmill
automatically adjust elevation except during one of the following three programs:
P2 = elevation program, H-SE = HRC by speed and elevation, and H-E = HRC by elevation.
Elevation may be adjusted even while the running belt is not moving. However, during the
program setup mode, elevation will not be adjustable.
PULSE FUNCTION
This treadmill features wireless heart rate monitoring, the most advanced technology to date for
accurate read out of your heart rate. For convenience, this treadmill is also designed to pick up
heart rate info via the contact sensors located on the horizontal handlebar. Treadmill will look for
wireless pulse signal first. If no wireless pulse signal is present, then treadmill will look for the
signal from contact sensors.
To use the wireless pulse monitoring system, you must wear the heart rate transmitter chest strap.
Place the contact surface next to your skin directly under your heart to pick up the pulse signals
from your heart. The heart rate transmitter strap is an optional purchase and not included with
this treadmill.
To use the contact heart rate, place your hands gently but firmly around the contact sensors on
the handlebars. Movements in the hands may cause difficulty for the treadmill to pick up the
signal properly. When signal is picked up, the LED light next to the pulse display window will
light up and flash to the rate of your heart beat.
Please note that some fibers used in clothes (e.g. polyester, polyamide) create static electricity
which may prevent reliable heart rate measurement. Also, note that mobile phone, television
and other electrical appliances form an electro-magnetic field around them, which may also cause
problems in heart rate measurement.
PAUSE FUNCTION
When STOP button is pressed during workout, program is suspended. After the running belt has