WELCOME | BIENVENUE | BIENVENIDO
THE KEURIG PROMISE Your new Keurig® 2.0 brewer isn’t just simple, it’s also super smart. And so are the Keurig® brand K-Cup® and K-Carafe™ pods we’ve created for it. The brewer and the pod work together to guarantee that when you press the Brew button, your beverage will be brewed to perfection. Every time. Just look for the Keurig Brewed® seal to be sure you’re using Keurig® brand pods. HERE’S HOW THE SYSTEM WORKS: 1. Pop in your favorite Keurig® brand pod. 2. Keurig 2.
ENGLISH
IF IT DOESN’T HAVE THE KEURIG BREWED ® SEAL, IT’S NOT KEURIG ® QUALITY In order for your Keurig® 2.0 brewer to give you the best beverage possible, be sure to use only Keurig® brand pods. The Keurig® 2.0 brewer reads the lid of the Keurig® brand pod to provide the perfect beverage setting. Your Keurig® 2.0 brewer will not work with pods that don’t have the Keurig Brewed® seal. It’s our way of making sure that the beverage you love will always be the beverage you get.
ANOTHER THING IT MAKES: EVERYONE HAPPY Whether your morning joe gives you grounds for celebration or mocha makes you over the moon, your Keurig® 2.0 brewer is able to brew over 350 varieties of coffee, tea, and hot cocoa, plus seasonal and café-style beverages.* But it doesn’t stop there. Your Keurig® 2.0 brewer is our best brewer yet and it’s only going to get better. We’ll be innovating every day to create even more single serve and carafe options to satisfy every mood and moment.
Over 350 varieties from more than 50 gourmet brands* START EXPLORING NOW! Visit Keurig.com to see what’s brewing. *Not all varieties may be available in your region.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should be followed, including the following: 10. Turn off and unplug the brewer 1. Read all instructions before using. 2. Do not touch hot surfaces. Use 3. 4. 5. 6. 7. 8. 9. 11. handles and knobs when available. This appliance must be properly installed and located in accordance with these instructions before it is used.
SAVE THESE INSTRUCTIONS. 17. Always keep the Water Reservoir 18. 19. 20. 21. 22. 23. Lid on the Water Reservoir unless you are refilling it. This appliance is equipped with a Power Cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.
CAUTION: There are three sharp needles that puncture pods, two above the Pod Holder and the other in the bottom of the Pod Holder. To avoid risk of injury, do not put your fingers in the Pod Holder Assembly. CAUTION: There is extremely hot water in the Pod Holder during the brew process. To avoid risk of injury, do not lift the Handle or open the Pod Holder Assembly during the brewing process. CAUTION: Do not fill above the MAX FILL line.
USER GUIDE TABLE OF CONTENTS KEURIG ® 2.
FEATURES K A L B C M D E F G H I J K200 SERIES BREWER A. B. C. D. Water Reservoir Lid Water Reservoir Top Housing Touch Display/Power Button E. F. G. H. I. Brew Button Handle Brew Head Power Cord Drip Tray Plate 14 J. Drip Tray K. Pod Holder L. Housing (K and L are the Pod Holder Assembly) M.
TOUCH DISPLAY CONTROLS scroll A READY B Lift to Begin A B HOME SCREEN A. Settings Button B. Power Button C 8 oz 1 3-4 D C SCREEN FOR K-CUP ® PODS SCREEN FOR K-CARAFE PODS A. STRONG A. KEURIG BREW™ Setting 1 B. Brew Size C. Power Button TM (only available for coffee) B. HOT COCOA/OTHER (for select non-coffee beverages) C. Brew Size D.
SET-UP & CLEANSING BREW SET-UP 1. Place the brewer on a counter and plug into a grounded outlet. 2. Lift the Handle, remove and discard the shipping disk. 4. Press the Power Button and wait for preheating to complete, about three minutes. 3. Rinse the Water Reservoir, fill with bottled or filtered water, and return it to the brewer. Be sure to fill below the MAX FILL line and above the MIN FILL line.
SECTION 1 CLEANSING BREW 1. To begin a cleansing brew, place a 12 ounce mug on the Drip Tray. 2. Lift and lower the Handle. Do not place a Keurig® brand pod in the Pod Holder. 4. You are now ready to use your brewer! 3. Press CONTINUE to dispense hot water. Select a 6 ounce Brew Size and press the Brew Button.
BREW YOUR FIRST K-CUP ® POD 1. Place a mug on the Drip Tray. Select a K-Cup® pod, place firmly in the Pod Holder. 2. Lower the Handle. CAUTION: There are sharp needles that puncture the K-Cup® pod above and below the Pod Holder. To avoid injury, do not put your fingers in the Pod Holder. NOTE: Do not remove the foil lid or puncture the K-Cup® pod. NOTE: Your Keurig® 2.0 brewer will not work with pods that do not have a Keurig Brewed® seal on them. 3. Select a Brew Size. Select STRONG if desired.
BREW YOUR FIRST K-CARAFE TM SECTION 1 POD 1. Make sure the Keurig Carafe is empty. Remove the Drip Tray and insert the Keurig Carafe securely in its place. 2. Select a K-Carafe pod, place firmly in the Pod Holder and lower the Handle. TM TM TM CAUTION: There are sharp needles that puncture the K-Carafe pod above and below the Pod Holder. To avoid injury, do not put your fingers in the Pod Holder. TM NOTE: Do not remove the foil lid or puncture the K-Carafe pod. TM NOTE: Your Keurig® 2.
STOPPING THE BREW PROCESS FOR K-CUP® PODS AND K-CARAFE PODS (KEURIG BREW™ SETTING 1) TM To stop the brewing process, press and hold the Power Button for one second. Remove and dispose of any used pod. Brewing a used pod is not recommended. HOT: DO NOT LIFT! HOT: DO NOT LIFT! Brewing Brewing ADDING WATER Your Keurig® 2.0 brewer will indicate when the water level in the Water Reservoir is low and you will not be able to brew. The brewer will only indicate “More Water Please.
SECTION 2 DISPENSING HOT WATER INTO A MUG 1. Place a mug on the Drip Tray. Lift and lower the Handle without a pod. 2. Press CONTINUE to dispense hot water. Dispenase Hot Water? H CANCEL 3. Select your Brew Size and press the Brew Button. CONTINUE 4.
SETTINGS MENU ACCESS SETTINGS SETTINGS LANGUAGE Explore everything your Keurig® 2.0 brewer has to offer by accessing the SETTINGS menu. From the home screen, select the Settings Button. HIGH ALTITUDE WATER FILTER REMINDER Lift to Begin settings back Use the arrows to scroll through the menu. To exit, press the back button. home Press the back button to return to the SETTINGS menu or press the HOME button to return to the home screen. Your settings will be automatically saved.
SECTION 2 SETTINGS ENABLE HIGH ALTITUDE HIGH ALTITUDE LANGUAGE HIGH ALTITUDE To ensure your brewer works properly at higher altitudes (5,000 feet), ENABLE the HIGH ALTITUDE mode. ENABLE WATER FILTER REMINDER back Press the back button to return to the SETTINGS menu or press the HOME button to return to the home screen. Your settings will be automatically saved.
CARING FOR YOUR BREWER CLEANING THE BREWER EXTERIOR Keep your Keurig® 2.0 brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids. CLEANING THE DRIP TRAY The Drip Tray can accumulate up to 8 ounces of overflow. The Drip Tray and the Drip Tray Plate should occasionally be rinsed clean.
SECTION 2 CLEANING THE WATER RESERVOIR AND THE WATER RESERVOIR LID Clean the Water Reservoir and the Water Reservoir Lid with a damp, soapy, lint-free, non-abrasive cloth and rinse thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain. Be sure to rinse the Water Reservoir thoroughly after cleaning to ensure that no cleaning solutions remain as they may contaminate the water supply in the brewer. DO NOT PLACE THESE ITEMS IN THE DISHWASHER.
CARING FOR YOUR BREWER CLEANING THE POD HOLDER 1. Lift the Handle. 2. Push up while grabbing the sides of the Pod Holder Assembly. Pull away from the brewer. CAUTION: Sharp needles. Do not put fingers in chamber. 3. Pull out the Pod Holder Assembly (1) and Base (2). 4. Press the release buttons on both sides of the Pod Holder Assembly. Separate the Pod Holder from the Housing.
SECTION 2 5. Clean the Pod Holder (1), Housing (2), and Base (3) with a damp, soapy, lint-free, non-abrasive cloth and rinse thoroughly.
CARING FOR YOUR BREWER 2. Use a paper clip or similar tool to loosen the clog. Rinse thoroughly with hot water. CLEANING THE EXIT NEEDLE 1. If a clog arises in the Exit Needle, push the lever of the Pod Holder to reveal the Exit Needle. 3. After all pieces are cleaned, place the Base then the Pod Holder Assembly into the Brew Head. Lower the Handle. CAUTION: Sharp needles. Do not put fingers in chamber.
SECTION 2 KEURIG CARAFE OPERATION TM The unique Keurig Carafe was specifically designed for use with the Keurig® 2.0 brewer. To connect the Keurig Carafe to the brewer, make sure the Keurig Carafe is securely inserted into the brewer. The Keurig® 2.0 brewer contains a sensory system that determines when the Keurig Carafe is in place and it is safe to begin brewing. If the Keurig Carafe is not in place or incorrectly inserted, the brewing process will not begin.
MAINTENANCE ALERTS Your brewer is designed to deliver the perfect cup time after time, year after year. To keep it working at peak performance, your Keurig® 2.0 brewer will let you know when it needs a little attention. TIME TO REPLACE THE KEURIG® WATER FILTER (VISIT KEURIG.COM TO PURCHASE) Your brewer will indicate “Time to replace the Water Filter.” after every 1,000 ounces or two months. Once you’ve replaced the Keurig Water Filter, press YES to reset the WATER FILTER REMINDER notices.
SECTION 2 DESCALING YOUR BREWER Before you begin, you will need a large mug, fresh water, Keurig® Descaling Solution, and access to a sink. Do not use a paper cup. • Empty the water from the Water Reservoir. If there is a Keurig Water Filter, remove and set aside. TM STEP 1: FIRST DESCALING SOLUTION RINSE • Press and hold the Power Button to power the brewer off. • Pour the entire bottle of Keurig® Descaling Solution into the Water Reservoir.
MAINTENANCE ALERTS DESCALING YOUR BREWER (CONTINUED) The cleaning action of Keurig® Descaling Solution may result in a foam dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you may see only a small or no output dispensed followed by the sound of air blowing out. If this occurs: • Turn off and unplug the brewer.
RECYCLING K-CARAFE TM SECTION 2 POD CUPS 1. Once brewing is complete, lift the Handle and carefully remove the K-Carafe pod by holding the outer rim. The plastic cups of K-Carafe pods can be recycled wherever #5 plastic is accepted. #5 plastic may not be recyclable in your community today, so please check locally with your municipality or waste hauler, or visit KeurigRecycling.com for more information. #5 plastic is recyclable everywhere in Canada.
TROUBLESHOOTING BREWER DOES NOT HAVE POWER • Plug the brewer into an independent outlet without dimmer control. • Check to be sure that the brewer is plugged in securely. • Plug the brewer into a different outlet. • Reset your home’s circuit breaker if necessary. • Press and hold the Power Button and ensure the Touch Display is illuminated. BREWER WILL NOT BREW • After placing a pod in the Pod Holder, make sure the Handle is lowered completely and the Touch Display displays the appropriate brew screen.
SECTION 3 THE TOUCH DISPLAY INDICATES “MORE WATER PLEASE.” • If the water level is not low, remove the Water Reservoir and empty the water. Then thoroughly clean (refer to page 25). Fill the Water Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in its Base. THE K-CUP® POD HAS A KEURIG BREWED® SEAL, BUT TOUCH DISPLAY INDICATES “OOPS!” • Your Keurig® 2.0 brewer will not work with pods that don’t have the Keurig Brewed® seal on them.
WARRANTY LIMITED ONE YEAR WARRANTY Keurig warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you fill out and return the warranty card enclosed with your brewer so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase.
SECTION 4 OTHER LIMITATIONS THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR K200 BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Keurig Green Mountain, Inc. 33 Coffee Lane Waterbury, VT 05676 1.866.901.BREW (2739) P/N | Pièce n o | Pieza n.