Owner’ s manual Platinum Plus B79 Keurig® Brewer
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should be followed, including the following: 1. Read all instructions before using. 2. Do not touch hot surfaces. Use handles and knobs when available. 3. This appliance must be properly installed and located in accordance with these instructions before it is used. 4. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons. 5.
Set-Up Helpful Hints 1. Plug Brewer into its own grounded outlet. If the electric circuit is overloaded with other appliances, your Brewer may not function properly. The Brewer should be operated on its own circuit, separate from other appliances. 2. Keep your Brewer turned “ON”. To brew a fresh cup of coffee, tea or hot cocoa anytime you want, keep your Brewer turned “ON” all the time. However, the Brewer is fully programmable so you can set it to turn on and off automatically to match your schedule.
SECTION 1 Set-Up & First Brew fig. IMPORTANT: You cannot use your Keurig® Brewer until it has been set up for its first use as set forth below. Lock Tab 2 fig. NOTE: If Brewer has been exposed to temperatures below freezing, allow Brewer at least two hours to reach room temperature before brewing. A frozen or extremely cold Brewer will not operate. READY TO BREW Setting Up Your Brewer fig. 1 4 9. Lift and lower the Handle. Press the BREW A grounded outlet.
SECTION 1 Set-Up & First Brew (continued) 11. Your Brewer may display “NOT READY” as it heats water for the next c. Once size is chosen, press BREW Button. Extra-Small Cup (3.25 oz.) Large Mug (9.25 oz.) brew cycle. The “READY TO BREW” indication will return to the LCD Control Center in about 15 seconds. BREW Button will remain illuminated, Left and Right Buttons will no longer be lit and icon of brew size will be lit. Stopping the Brew Process 7.
SECTION 2 SECTION 1 Set-Up & First Brew (continued) Controls & Indicators (LCD Control Center) Rinse Cycle Purging the Brewer Setting the Clock Your Brewer is equipped with a rinse cycle to flush out residual flavors that may be left from hot cocoa or flavored K-Cup® portion packs. If your Brewer has not been used for more than one week, you should purge the water from the inner tank. Setting the clock is optional. When the clock is set, the time will appear in the LCD Control Center.
SECTION 2 Controls & Indicators (LCD Control Center) fig. 11 fig. b. Press or hold the Left Button under the blinking “H” to advance 1 hour at a time, up to 9 hours. H c. After setting the desired Auto Off time, press the MENU Button five times to scroll through the remaining programming options and exit the programming mode. “AUTO OFF SET” (fig. 12) will now be displayed to indicate that it has been set. fig. READY TO BREW AUTO OFF SET MENU 12 13 M AUTO OFF TIME BREW TEMP BREW SIZE MENU d.
SECTION 2 Controls & Indicators (LCD Control Center) SECTION 3 5. To change the brew temperature again, repeat steps 1 through 3 to change Cleaning External Parts the temperature up or down, remembering that the temperature can only be between 187° and192°. 1. Never immerse the Brewer in water or other liquids. The Housing and other external components may be cleaned with a soapy, damp, non-abrasive cloth. Programming Your Brew Size CLOCK 17 2.
SECTION 4 SECTION 3 Cleaning & Maintenance (continued) De-Scaling Instructions Service A. PREPARE Step 1: To begin, you will need the following: At least 48 ounces of undiluted white vinegar Access to an empty sink A large ceramic mug (do not use a paper cup) Beyond these recommended cleaning and maintenance procedures this Brewer is not user serviceable. For service, please refer to the Warranty section of this guide. Storage Step 2: Empty the water in the Water Reservoir.
SECTION 5 Warranty Limited One Year Warranty Other Limitations Keurig, Incorporated warrants that your Brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you fill out and return the warranty card enclosed with your Brewer so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace the Brewer without charge upon its receipt of proof of the date of purchase.
P/N 60-201284-000 Rev A 06/11 CLICK, CALL OR SHOP I www.keurig.com I 1.866.901.BREW I At over 18,000 stores in the U.S. and Canada Keurig, Incorporated 55 Walkers Brook Drive Reading, MA 01867 Keurig, Incorporated is a wholly-owned subsidiary of Green Mountain Coffee Roasters, Inc. For Household Use Only Covered by U.S. Patent Numbers 7,398,726, 7,165,488, 7,347,138, 7,377,162, D544,299, 7,360,418, 7,513,192 and other U.S. and foreign patents pending. Made and printed in China.
