Quick Guide

A Remove all adhesive

tape and the Touchscreen

label. Plug into grounded

outlet.

B Carefully remove Water

Reservoir Lid. Remove

Water Reservoir by lifting

up and away from

the Brewer.

C Rinse Water Reservoir

with fresh water, return

Reservoir to Brewer and

fill with water. Bottled

or filtered water is

recommended.

Step 1 Prepare Water Reservoir

The Keurig

Vue

™

Brewer is not for use with K-Cup

portion packs.

Keurig

Vue

™

Brewer

Quick Start Guide

PAGE 1
Keurig® Vue™ Brewer Quick Start Guide Step 1 Prepare Water Reservoir A Remove all adhesive tape and the Touchscreen label. Plug into grounded outlet. B Carefully remove Water Reservoir Lid. Remove Water Reservoir by lifting up and away from the Brewer. C Rinse Water Reservoir with fresh water, return Reservoir to Brewer and fill with water. Bottled or filtered water is recommended. The Keurig® Vue™ Brewer is not for use with K-Cup® portion packs.
PAGE 2
Step 2 Prepare Brewer Lift to Brew 4 A Place a 10 oz. mug toward the back of the Drip Tray and press the Power Button. B Once your Brewer is turned on, wait until the Touchscreen indicates “Lift to Brew” (about four minutes). Step 3 Brew Your First Beverage C Lift and lower the Handle, then press the flashing “BREW” Button. Your Brewer will dispense 8 oz. of hot water into your mug. Discard the hot water.