MINI ELLIPTICAL PEDAL EXERCISE BIKE User Manual
CAUTION It is important to read this entire manual before assembling and using the equipment. Safe and efficient use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 2.
HOW TO INSTALL Step 1 Install the Front Base Leg of Pedal Exercise Bike Main Body screwdriver for this. Note: Ensure that the Front Base positioned. Step 2 corresponding crank arms. Use the supplied open-ended spanner Note: The foot pedals and crank arms are marked with “L” for left and “R” for right. Make sure the markings on pedals and crank arms are matched during assembling. - Left pedal should be threaded anti-clockwise. - Right pedal should be threaded clockwise.
REPLACING THE BATTERY • • • Take the training computer carefully out of the holder. Remove the exhausted battery. Insert a new battery (1.5 V, AAA) into the battery compartment on the underside of the training computer. Note: Make sure you fit the battery the right way matching the polarity. The correct polarity is shown inside the battery compartment. Check that the plug-in connector is correctly inserted. Insert it again if necessary.
