Cov lus qhia

Demo Kit Quick-Start Guide

Additional Applications and Resources

Page 10 of 15

DevSuite Quick-Start Guide – Rev. 65 onsemi reserves the right to change products or specifications without notice.

‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by onsemi

without notice. Products are only warranted by onsemi to meet onsemi’s production data sheet specifications.

Additional Applications and Resources

There are several additional DevSuite applications and resources that are useful for demonstrating and configuring

sensors.

This application produces register settings based on the sensor’s various parameters; width/height, mode, output

type, etc.

SensorTune

This application produces the Color Correct Matrix (CCM) for a sensor or ISP.

FlashTool

This application configures and produces the binary image for Flash storage of ISP and SOCs that support it.

Side-by-Side Demo

This application allows two onsemi Imaging Demo cameras to be simultaneously displayed side-by-side. It is useful for

comparing differences in equal sized sensors, although dissimilar sensors may also be used. Synchronous control of

both images is provided for panning, zooming and play-state. Side-by-Side can be launched via the desk-top shortcut.

Software Development Kit (SDK) - ApBase

ApBase provides an API of the main functions of DevWare and is available for users to write their own applications to

interface to onsemi sensors. Information can be found via the shortcut:

Start->All Programs-> Aptina Imaging->SDK.

ApBase files are included in the General Software installer, but a stand-alone installer is available for only the API files.

ApBase stand-alone; download and install the

API.

AiViewer

A video viewing application is available for installation via this

link.

IQWare

An image quality evaluation tool, with documentation found here.

LensTools

A stand-alone installer of the Lens Shading Correction command-line tool, available for installation via this

link.

Training Videos

A set of training videos can be found via the shortcut:

Start->All Programs-> Aptina Imaging->Training->DevWare Training.

Documentation

There are various sets of documentation, including User and Development Guides, found via the Windows shortcut:

Start->All Programs->Aptina Imaging->Docs.

The documentation is also available from within DevWareX from the “Documentation” menu item.

Tools Shortcut

There are various other applications that can be found via the shortcut: