Cov lus qhia

Demo Kit Quick-Start Guide

Appendix A

Page 15 of 15

DevSuite Quick-Start Guide – Rev. 65 onsemi reserves the right to change products or specifications without notice.

‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by onsemi

without notice. Products are only warranted by onsemi to meet onsemi’s production data sheet specifications.

Appendix A

Requirements

Hardware and software requirements for onsemi’s development kit are detailed below.

Hardware Requirements

• In general, a desktop or laptop manufactured in 2016 or later will suffice.

• Processor i3 or better (a faster processor will improve the displayed frame rate on the PC). Advanced noise

reduction, sophisticated demosaic, and high dynamic range processing are very CPU-intensive.

• Available C: disk space of at least 600Mb. Network drive installation is NOT recommended.

• Installed Memory: 8GB minimum. Available RAM at least sensor size times 40 bytes. For example 600MB available

RAM for a 14MP sensor. Remember to account for RAM needed by the system and by other applications or memory-

resident software when calculating total system RAM requirements.

• Compatible USB3.0 or USB3.1 host controller. Most new PCs and Laptops have Intel Integrated Chipsets, which

will work with the Demo3. Use this

link to review known supported systems.

Note: some USB2 port implementations are not backward compatible to the Demo3, and may cause loss of data

streaming and/or poor performance. It is highly recommended that you DO NOT connect the Demo3 to a USB2 port.

• 1280 x 1024 minimum resolution. Graphics card and drivers capable of handling the images from the sensor;

some graphics cards or drivers will not display images much larger than about 8MP.

Software Requirements

• Windows 7 with a minimum of Service Pack 1 or

• Windows 10 with or without Service Packs.

• The latest Chipset drivers for the USB3.0 or USB3.1 host controller.

Do a Web search of “<Your PC manufacturer> <Your PC Model> USB3 FW driver update”.

• Python; for products that require it, you will be prompted with the URL for the location of where to download the

installer.

• Matlab Runtime Library; DevSuite’s SensorTune application requires this.

You will be prompted with the URL for the location of where to download the installer.