Product Datasheet/Brochure

ManualsBrandsKey Digital ManualsHome Theater NetworkingKey Digital - X Series HDBaseT Cat-5e/6 Tx and Rx HDMI Extenders - Black

KD-X222

HDBaseT/HDMI via CAT5e/6 Extenders, Series X (Tx + Rx Set)

* For all installations, we highly recommend use of KD-CAT6STP1X STP cabling, especially in hostile electrical environments. The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used.

The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard. The use of STP CAT5, 5e is not recommended.

System Design Example

Key Features

›

HDBaseT via Single CAT5e/6 UTP/STP Extension:

With fully automatic

adjustment of feedback, equalization, and ampliﬁcation depending on

cabling length

›

Signal Extension:

Up to

150 ft. @ 4K

24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling

Up to

125 ft. @ 4K

24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6

UTP/STP cabling

Up to

250 ft. @ 1080p

/ 1920x1200 using KD-CAT6STP1X cabling

Up to

230 ft. @ 1080p

/ 1920x1200 using third-party CAT5e/6 cabling

›

HDCP 2.2:

Compliancy up to HDCP 2.2 and backward compliant

›

HDR10 (High Dynamic Range):

More life-like images through a greater range

of luminance levels

›

4K/Ultra HD Resolution:

Support for 4096x2160 or 3840x2160 24/25/30Hz at

4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit

›

Deep Color Support:

Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit

›

3D:

Support for standard 3D stereoscopic signal formats

›

Low Proﬁle:

Super slim chassis design

›

HDMI

and HDCP Licensing:

Fully licensed and compatible with HDCP 2.2 and

HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s

›

EDID Control:

Internal library features 15 default EDID conﬁgurations and native

EDID data from Output/Display devices connected via Rx

›

Hot Plug Detection Control:

Enables integrator to choose if active signal voltage

is forced to connected input devices

›

Full Buffer System

™

Manages TMDS re-clocking / signal re-generation, HDCP

authentication with source & display, EDID Control handshake, and Hot Plug control

›

IR Sensor:

Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR

from remote(s) without external IR connecting block

›

Up/Down IR:

Two channels of IR enable control to/from devices connected to

Tx and Rx units

›

RS-232:

Bi-Directional control to/from Tx and Rx unit on Phoenix connector

›

Rotary Switch RS-232 Control Mode:

Provides control of Tx unit as well as

connectivity status

›

Lossless compressed digital audio:

Support for Dolby

TrueHD, Dolby

Digital Plus,

Dolby Atmos

, and DTS-HD Master Audio

™

›

CEC Support:

For inter-device control between input and output HDMI channel

›

I2C Communication:

EDID and HDCP authentication to Display and Source

›

Control System Support:

Fully controllable by all RS-232 supported control systems

via open API: Compass Control

, AMX

, Crestron

, KNX

, RTI

, Savant, URC

Leviton

etc.

Speciﬁcations

›

Regulation: CE, RoHS, WEEE

›

Enclosure: Black Metal

›

Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs

›

Power: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz,

Interchangeable head with screw-in connector

›

Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor

CAT5e/6 Extenders

Huddle RoomEquipment Rack

Remote

IR Sensor

Up to 150 ft.

@ 4K

WiFi

HDMI

CAT5e/6

IR Out

WiFi Router

Master Controller

KD-MC1000

KD-ProCL1

KD-X222

Video Conferencing

Product Link