Operation Manual

Option Select

Interface

◆

Battery Power Bar Setting

VOL means voltage setting. Each bar represents a voltage value. 5 voltage values

must be entered one by one.

For example, VOL 1 is first bar

voltage value, the default

value is 31.5. Press UP/DOWN to increase or reduce the number.

Press MODE to confirm

and enter the second bar. By analogy, after 5

voltage values is entered

,holdMODE to

conf irm

and return to previous menu.

Battery Power Bar Setting

◆

Power Assistant Level Set t ing

Power Assistant Level Select

In power assistant level setting, there are 8 mode s to select：0-3, 1-3, 0-5, 1-5, 0-7, 1-

7, 0-9, 1-9. The default mode is 0-5. Press Up/DOWN to select the mode, and press MODE

to confirm and enter the PAS ratio setting page.

1-5

flash

PAS Mode Select Interface