Instruction Manual

ManualsBrandsKEYANG ManualsAudio EquipmentSolar Bluetooth Speaker

Instruction Manual

Solar Charging Bluetooth Rock

Speakers

Pairing One Speaker with a Bluetooth Device :

STEP1. Turn on the speaker,push in the the power button on the back of the speaker.

STEP2. A tone will be heard and the Bluetooth indicator light will quickly flash BLUE.Now the speaker

is discovery mode.

STEP3. Go to settings,make sure your personal Bluetooth-enabled device is ON,and search for the

discovered Bluetooth device,select “keyang”.When the speaker is successfully paired,a tone will be

heard and the Bluetooth indicator light will light up BLUE.

STEP4. Open your media player and press PLAY.You can control the music and volume from your

connected device.

Random Pairing Two Speakers with a Bluetooth Device :

NOTE: If you would like to pair the speaker to another device,you must unpair the speaker from the

currently paired device first.(Select “keyang”” from your device’s Bluetooth settings,then select

unpair)

NOTE:Multiple speakers cannot be paired to the same device at the same time.

NOTE:Pairing distance is about 30 ft,so keep the speaker and your Bluetooth-enabled device within

30 ft during the pairing process.

Summary of content (5 pages)

PAGE 1
Instruction Manual Solar Charging Bluetooth Rock Speakers Pairing One Speaker with a Bluetooth Device : STEP1. Turn on the speaker,push in the the power button on the back of the speaker. STEP2. A tone will be heard and the Bluetooth indicator light will quickly flash BLUE.Now the speaker is discovery mode. STEP3. Go to settings,make sure your personal Bluetooth-enabled device is ON,and search for the discovered Bluetooth device,select “keyang”.
PAGE 2
STEP1.Choose random same speakers,turn them on,the Bluetooth indicator light will flash BLUE on each. STEP2. Double click the pairing button on both speaker,a chime will be heard,and then the main speaker will flash BLUE light,and the secondary speaker will be steady BLUE light. STEP3. Go to settings,make sure your personal Bluetooth-enabled device is ON,and search for the discovered Bluetooth device,select “keyang””.
PAGE 3
Battery charging Charging the speaker with USB Cable STEP1. Plug the small end of the Micro USB Charging Cable into the Micro USB port on the back of the speaker. STEP2. Connect the larger end of the Micro USB Charging Cable into your computer or other USB charging device.Recommended charge time with USB cable is about 5-6hours.When the speaker is charging,the charging indicator light will light up RED,after fully charged, the charging indicator will turn GREEN. STEP3.
PAGE 4
Warranty ONE YEAR LIMITED WARRANTY WHAT IS COVERED The manufacturer warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase.This warranty only applies to the original consumer purchaser and only to products used in normal use and service.
PAGE 5
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.