Instruction Manual

10
④Click the "Start Measurement" button to start acquiring data.
⑤If necessary, set the Max Level /Min Level of the image, Distance specifications, the P(d)/P(x) graph display.
（６）Saving measured data (For each saved data format, refer to Appendix 1.)
In addition to performing automatic saving of measured data, you can also execute it from the File menu.
There are the following three types of storage.
(a) Save the latest acquired data in raw data format
Select "Save as raw data" from the "File" menu on the main screen.
The measured data is saved in CSV format.
In this case, only one image data is saved.
(b) Save multiple measured data (Multiple File)
Select "Save as Multiple File" from the "File" menu.
Measurement data stored in memory is saved in CSV format.
Up to 1000 image data can be stored in the memory. A serial number is automatically assigned to the file name, and
a file is created for each image data.
The contents of the memory are cleared each time the "Start Measurement" button is clicked.
(c) Save as bitmap or JPEG
Select Save as image from the File menu.
The same operation can be done from the Save as image button on the main screen.