User Manual

1-8
1
Overview
1-3 Basic operations
This section explains the basic operations of the barcode reader.
Reading a barcode
Point the transmitter/receiver toward the barcode and press the trigger switch about 50 mm
away from the barcode.
• When the barcode is read, the operation status LED (green) lights up and the buzzer
sounds.
(You can make the setting for the operation status LED and the buzzer not to operate.)
• The read barcode data is sent to the connected computer or other equipment.
■ Notes for reading
Adjust the reading direction and reading timing so the laser beam can be emitted from the
one end to the other end of barcode to scan correctly.
• Correct scanning
• Wrong scanning
You cannot specify which barcode to read