User Manual

2-7
2
Connections
2-3 Recharging HR-51
Use the dedicated communication unit HR-UC51 to recharge HR-51.
■ Recharge method
1Connect the supplied AC adaptor or optional AC adaptor to the communication unit HR-
UC51 and confirm the power is ON.
2Set HR-51 to the communication unit HR-UC51 so the recharge terminal of HR-UC51 is
not misaligned with that of HR-51.
As soon as recharging starts, the operation status LED of HR-51 lights red.
Recharging is complete when the operation status LED of HR-51 lights green.
Note
There is no remaining battery at the time of shipment. Be sure to charge the battery
when using this product for the first time.
Note
Clean the recharge terminals of HR-51 and HR-UC51 periodically ( page 7).
Dirt will interfere with recharging.