User's Manual

E HR-100B-IM

Part Names and Functions



Operation status LED

The operation status LED lights up as below according to the operation status.

Basic Operations

Bring the reading window to the code and press the trigger switch. The LED light

and the aimer indicating the reading position are emitted, and the code is read.

• When the code is read, the operation status LED (green) lights up and the

buzzer sounds.

(The operation status LED and the buzzer can be disabled.)

• The read code data is sent to the connected PC or other equipment.

Removing the battery cover

1 Rotate the screw counterclockwise to loosen it.

2 Push the cover up and at an angle with your thumb to remove it.

Inserting the battery and securing the cover

1 Insert the battery straight in as shown in the figure below.

2 Attach the cover to the hook and close it.

Rotate the screw clockwise to secure the cover.

3 Return the metal loop used to rotate the screw to the flat position.

LED color LED light-up timing

Green

• When a code is read

• When a setting code is read in the setting mode

Red

• When an operation error occurs when an operation is specified

• When an invalid setting code is read while reading a setting code

Trigger switch:

Use this switch to read a code.

Operation

status LED:

indicates the

operation

status.

Reading window:

Emits LED light and aimer and receives

the reflected light.

Buzzer

Hook