Instruction Manual
Table Of Contents
2
DX_IM_GB
Precautions on wireless LAN
Electromagnetic display of technical standards compliance mark
This terminal complies with technical standards based on the Radio Act and
Telecommunications Business Act of Japan. The mark indicating this compliance ( )
can be viewed as indicated below.
DX-A600/A400: From the app list screen, Settings
About phone
Regulatory
DX-W600: From the Start menu (All apps), DX setup tool Device information
Regulatory
CE and UKCA Markings
KEYENCE Corporation has confirmed, on the basis of the following specifications, that
this product complies with the essential requirements of the applicable EU Directive(s)
and UK regulations. Be sure to consider the following specifications when using this
product in the Member States of the European Union and in the United Kingdom.
• RE Directive (CE) and Radio Equipment Regulations (UKCA)
• The full text of the EU declaration of conformity is available at the following internet
address: http://www.keyence.com/cedoc
• Frequency band of operation: Maximum radio-frequency power
DX-W600
WLAN
2400 to 2483.5 MHz: 20 dBm (100 mW)
5200 to 5690 MHz: 23 dBm (199.5 mW)
Bluetooth
2400 to 2483.5 MHz: 9 dBm (7.9 mW)
NFC:
13.56 MHz: 17 dBuA/m
DX-A600GE
WLAN
2400 to 2483.5 MHz: 20 dBm (100 mW)
5120 to 5350 MHz: 23 dBm (199.5 mW)
Bluetooth
2400 to 2483.5 MHz: 13 dBm (20 mW)
NFC:
13.56 MHz: -10 dBuA/m
WWAN
WCDMA
Band 1: 20.5 dBm (112.2 mW)
Band 8: 24.5 dBm (281.8 mW)
LTE
Band 1: 20 dBm (100 mW)
Band 3: 21 dBm (125.9 mW)
Band 7: 20 dBm (100 mW)
Band 8: 24 dBm (251.2 mW)
Band 38: 24 dBm (251.2 mW)
DX-A400GE
WLAN
2400 to 2483.5 MHz: 17 dBm (50.1 mW)
5120 to 5350 MHz: 22 dBm (158.5 mW)
Bluetooth
2400 to 2483.5 MHz: 10 dBm (10 mW)
NFC:
13.56 MHz: -12 dBuA/m
WWAN
WCDMA
Band 1: 22.5 dBm (177.8 mW)
Band 8: 24 dBm (251.2 mW)
LTE
Band 1: 22.5dBm (177.8 mW)
Band 3: 24 dBm (251.2 mW)
Band 7: 18.5 dBm (70.8 mW)
Band 8: 24 dBm (251.2 mW)
Band 38: 20.5 dBm (112.2 mW)
Remarks: These specifications do not give any guarantee that the end-product with this
product incorporated complies with the essential requirements of RE Directive and Radio
Equipment Regulations. The manufacturer of the end-product is solely responsible for the
compliance on the end-product itself according to this directive and these UK regulations.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz
frequency range.
UL certification
The DX Series complies with the following UL/CSA standards and has obtaied the UL/
C-UL certifications.
• UL File No. E167973
• UL category AZOT/AZOT7
• Applicable standards UL 62368-1
CAN/CSA-C22.2 No. 62368-1
• This product is intended to be supplied by an UL Listed power supply and power
cord suitable for use at 55°C min., the power supply output is rated: 5 Vdc, 2 A with
marked Class II, L.P.S. or PS2, if need further assistance, please contact KEYENCE
CORPORATION for further information.
• Ce produit est destiné à être alimenté par une alimentation et un cordon
d'alimentation homologués UL adaptés à une utilisation à 55°C min., la sortie
d'alimentation est nominale : 5 Vdc, 2 A avec marqué Class II, L.P.S. ou PS2, si vous
avez besoin d'aide supplémentaire, veuillez contacter KEYENCE CORPORATION
pour plus d'informations.
Be sure to consider the following specifications when using this product as a UL certified
product. Use this product in combination with the DX-BS*/BQ*/BP*/KE1, which has
obtained UL certification.
FCC Regulations
• This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions; (1) This device may not cause harmful interface, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
• Application regulation
FCC Part 15 Subpart B Class A
FCC Part 15 Subpart C
FCC Part 15 Subpart E
• 5150-5350MHz band is restricted to indoor operations only.
• Regulatory information page is located at:
DX-A600/A400: From the app list screen, Settings → About phone → Regulatory
DX-W600: From the Start menu (All apps), DX setup tool → Device information →
Regulatory
ISED Regulations
This device complies with the following regulations specified by the ISED.
• Applicable regulation
CAN ICES-003 (A) / NMB-003 (A)
RSS-247
RSS-102
• The device for operation in the band 5150–5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems.
• Operations in the 5250-5350 MHz band are restricted to indoor usage only.
• 5600-5650 MHz band is not allowed at Canada.
• Les dispositifs fonctionnant dans la bande de 5150- 5250MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
• Les opérations dans la bande de 5250-5350 MHz sont limités à un usage intérieur
seulement.
• La bande de 5600-5650 MHz n'est pas autorisée au Canada.
Precautions on Regulations and Standards
Remove the main battery of the DX Series near locations where using
wireless devices is banned at medical institutions or near electric devices
for medical purposes. Carry and use the product away from an implanted
cardiac pacemaker.
• Communication may be impossible at locations near metallic
objects, locations surrounded with metallic walls, where there is a
lot of metallic powder, and in similar usage environments. Be sure
to check whether communication is possible prior to installation.
• If this product is used near devices with the same frequency band,
radio wave interference may occur and the communication speed
may become slow or communication may become impossible.
[Japan]
• Never disassemble or modify this device. Doing so is prohibited by
the Radio Act. This device is specified radio equipment according
to the Radio Act. Follow the criteria defined within this act to obtain
construction design certification.
• This device may be used outdoors when communicating with
registered stations in the 5.2 GHz band.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK(NI)
IS LI NO CH TR
WARNING
Important
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her
own expense.
• Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
• The product comply with the US portable RF exposure limit set forth for
an uncontrolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
• This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
• This equipment should be installed and operated at least 10 mm
away from your body.
• This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
• The product comply with the Canada portable RF exposure limit set
forth for an uncontrolled environment and are safe for intended
operation as described in this manual. The further RF exposure
reduction can be achieved if the product can be kept as far as
possible from the user body or set the device to lower output power
if such function is available.
• This equipment should be installed and operated at least 10 mm
away from your body.
• Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
• Le produit est conforme aux limites d'exposition pour les appareils
portables RF pour les Etats-Unis et le Canada établies pour un
environnement non contrôlé. Le produit est sûr pour un
fonctionnement tel que décrit dans ce manuel. La réduction aux
expositions RF peut être augmentée si l'appareil peut être conservé
aussi loin que possible du corps de l'utilisateur ou que le dispositif
est réglé sur la puissance de sortie la plus faible si une telle
fonction est disponible.
• Cet équipement doit être installé et utilisé à une distance d'au moins
10 mm de votre corps.
CAUTION
CAUTION
CAUTION