Instruction Manual
Table Of Contents
3
DX_IM_GB
Handling of packing
As an example, the installation of the DX-BS6 is explained below.
1 Insert the tip of the unit into the back of
the main unit.
2 Attach the unit to the main unit by
using two fingers to push the two parts
of the unit indicated with arrows until
they click.
* To remove the unit, press the tabs on the
back of the main unit from the left and right,
and then pull the unit up from the main unit.
microSD / nano SIM card installation
The DX-A600/A400 has a microSD slot and a nano SIM slot. The DX-W600 has a microSD
slot.
1 Turn off the main
unit and remove
the main battery.
2 Slide the desired
slot cover in the
direction of the
arrow to unlock it,
allowing the card
to be inserted.
3 Open the slot
cover.
4 For the DX-A600/
A400, orient the
card with its
terminals at the
bottom, and then
place it in the slot.
For the DX-W600,
insert the card
into the slot cover
so the terminals
are at the bottom
when the slot
cover is closed, as
shown in the
figure.
5 Close the slot
cover and lock it
by sliding it in the
direction of the
arrow.
Clean the following parts with compressed air periodically.
If removing dirt is difficult, use a dry cotton swab to clean the unit connectors and charging/
communication contact.
(Use absolute ethanol if dirt is stuck on them.)
When using an expansion unit, also clean its charging/communication contact.
When opening the package, check that the following items are all included.
In the event of missing, defective, or damaged items, contact your nearest KEYENCE
sales office.
DX-A600/A600GE/A400/A400GE/W600
Precautions for Proper Use
• If units such as the DX-BS6 are not properly attached, the
enclosure rating of the DX Series cannot be guaranteed. When
using this product in environments where water or dust is present,
check if these units are properly attached.
• Dropping the DX Series or subjecting it to extreme shock may
lead to the loss of water-proofing. Take adequate care when
handling this product.
Unit Installation
Even when not using a microSD or nano SIM card, be sure to close
and lock the slot cover(s).
The slot cover(s) may be damaged if unlocked.
NOTICE
2
3
4
5
DX-A600/A400
nano SIM card
DX-W600
microSD card
NOTICE
Cleaning
If dirt or dust is attached, contact failure may occur on the unit
connectors or charging/communication contact. This may cause
charging function deterioration and instantaneous interruption.
Make sure that textile waste is not attached to the unit connectors or
charging/communication contact when cleaning.
Checking the Package
Specifications
Model DX-A600/A600GE DX-A400/A400GE DX-W600
Controller
CPU ARM
®
Penta Core
Intel
®
Quad Core + Scan
processor
OS Android
Windows
®
10
IoT Enterprise
Main
memory
Internal
memory
3 GB RAM, 16 GB ROM
4 GB RAM,
64 GB ROM
Display
LCD 6.0-inch, 720 × 1440 4.0-inch, 480 × 800 6.0-inch, 720 × 1440
Operation
confirmation
LED
3-color LED
Operations
Hard keys
Trigger keys × 2,
volume up and down
keys, power key,
side Fn keys × 2
Trigger keys × 2,
volume up and down
keys, power key,
front Fn keys × 3
Trigger keys × 2,
volume up and down
keys, power key,
side Fn keys × 2
Touch panel Electrostatic capacitance method (reinforced glass specifications)
Scanner
Reading light
source
High-intensity white LED
Pointer light
source
Visible light semiconductor laser (655 nm)
Output 390 µW
Class 1 laser product (IEC 60825-1)
Minimum
resolution
2D code: 0.169 mm, barcode: 0.076 mm
Field range 186 × 114 mm (reading distance: 200 mm)
Supported
codes
UPC/EAN/JAN (add-on code supported), CODE128, GS1-128,
CODE39, Codabar (NW-7), CODE93, ITF, COOP2of5,
industrial 2of5, QR code, micro QR, DataMatrix (ECC200), PDF417,
GS1 DataBar, composite symbol, Postal
Communication
Wireless LAN
IEEE802.11 a/b/g/n/ac
2.4 GHz (b,g,n: 1 to 11 ch)
5.2 GHz, 5.3 GHz (a/n/ac)
*1
IEEE802.11 a/b/g/n/ac
2.4 GHz
(b,g,n: 1 to 14 ch)
5.2 GHz, 5.3 GHz,
5.6 GHz, 5.8 GHz
(a/n/ac)
*1*2
Bluetooth Bluetooth® V5.1 BR/EDR/LE
Bluetooth® V4.2
BR/EDR/LE
WWAN 4G LTE / 3G, SIM-free, 1 nano SIM slot -
GNSS GPS, A-GPS, GLONASS, Beidou -
NFC ISO14443 Type A, B, FeliCa, ISO15693
External
media
micro SD/SDHC/SDXC UHS-I
Power
supply
Main battery Dedicated lithium ion battery pack
Clock Built-in lithium ion secondary battery, time: approx. 1 month
*3
Charging/communication contact
during contact charging
(DX-BS6 in this figure)
Unit connectors
NOTICE
Main unit...1 Instruction Manual...1