Owner's manual

C:\Documents and Settings\rChijimatsu\デスクトップ\AutoIDNavigator-E\modori\soft_ch02-02.fm
2-5
2-2 Names and Functions of Screen Parts
OUTLINE OF AutoID Navigator
2
■ Project display and Unit display
AutoID Navigator is provided with two display modes for registered devices and setup files,
Project display and Unit display.
When Project display is selected, the device configuration registered to the project is dis-
played, and when Unit display is selected, information is displayed according to each
device type.
Switching between Project display and Unit display is performed by the [Project] and [Unit] tabs,
respectively.
Click the tabs to switch between
display modes.
Unit display
Project display
Display by project configuration
Display by device type
Display Tab Features
Project
The device configuration registered to the project is displayed.
Parameters can be set up and managed by each currently registered device.
When no devices are registered to the project, only the project name is
displayed.
Unit
Devices that can be registered by AutoID Navigator are displayed by device type.
This feature is useful to batch-set parameters for a particular device type.
However, the settings cannot be sent to or received from the devices connected
via the NX-50 Series or the N-410 Series.