Manual

Chapter 6 PLC Link

108

Setting SYSMAC-C series

1. Set the RS-232C communication parameters (baud rate, data length, parity and

stop bit length) according to the BL-700’s settings.

2. Set the unit number according to the BL-700’s setting.

3. Set the command level to “Level 1, 2, 3”.

4. Set “1:1/1:N” to “1:N”.

5. Set “I/O port” to “RS-232C”.

6. Set “Trigger input” to “Internal”.

7. Set “Supply 5 V” to “Disable”.

8. Set “CTS” to “0 V (Normally ON).”

* The “I/O port”, “Trigger input”, “Supply 5 V” and “CTS” parameters may not be

provided depending on the type of link unit.