Manual

63
Chapter 4 Installing the Setup Software
4
ITF detail settings
When “ITF” is set for any of the 4 codes in the bar code setting and then [Detail] is
clicked, the following screen appears.
1. When “Check digit test” is set, the following appears:
When “Send check digit” is set, the BL-700 sends the data including the check
digit.
To calculate the check digit, the BL-700 uses Modulus 10/3 weight.
When reading the standard distribution code (bar code on the carton box), set 14 digits
or 16 digits in the bar code setting and set “Check digit test”.
Tips