Manual

Chapter 4 Installing the Setup Software

[Code 1 setup] Bar code = CODE39

[Main code length] [32]

[Min code length] [3]

[Send start/stop character (*)] [_] Enable

[Inspect check-digit [Modulus 43] [_] Enable

[Send check-digit] [x] Enable

-----Options setup------

[Max code length output] [x] Not used [_] Forward [_] Reverse

[Effective] [32]

[Starting] [1]

[Specify label orientation] [x] Not used [_] Forward [_] Reverse

[Code 2 setup] Bar code = Codabar

[Max code length] [32]

[Min code length] [3]

[Start/stop character] [_] Do not send [x] Lower-case [_] Upper-case

[Inspect check-digit] [_] Enable

[Send check-digit] [x] Enable

[Type of check-digit] Modulus 16

-----Options setup------

[Max code length output] [x] Not used [_] Forward [_] Reverse

[Effective] [32]

[Starting] [1]

[Specify label orientation] [x] Not used [_] Forward [_] Reverse

[Code 3 setup] Bar code = UPC/EAN

[Read EAN 13(UPC-A)] [x] Enable

[Read EAN 8] [x] Enable

[Read UPC-E] [x] Enable

[No. of UPC-A output] [x] 13 digits [x] 12 digits

[Add UPC-E system code 0] [x] Do not add [_] Add

-----Options setup-----

[Max code length output] [x] Not used [_] Forward [_] Reverse

[Effective] [32]

[Starting] [1]

[Specify label orientation] [x] Not used [_] Forward [_] Reverse

[Code 4 setup] Bar code = None

Printed: 98/01/07 20:40:28

(2/2)