Manual

KEYENCE CORPORATION. Vision System Division
‐ 15 ‐ www.keyence.com
7
If the settings are valid, the PC desktop folders appear, and the connection can be confirmed.
8
When these settings have been configured, images will be saved to the computer.
This screenshot shows
the destination folder
when it is checked again
after operating the CV‐X
and saving images.
Confirm that the /cv‐
x/image/(year month
day)_(hour minute
second)/CAM1 folder
has been created.
Images are saved to this
folder.
The desktop folders
are displayed.
If the settings are correct, the desktop
can be seen from the CV‐X, and the
folders are displayed.
Full‐width characters will appear
corrupted.
Folder names that include full‐width
characters cannot be specified as the
destination folder.
In this example, there is no folder called
CV‐X on the desktop when the settings
were finished.
In this case, the /cv‐x/image/SD1_000/
folder will be created automatically
when the CV‐X runs.
If the settings are not valid, a "Failed to
connect to FTP server. (31239)" error will
occur.
Check the settings again.
If there are problems, refer to the
troubleshooting section at the back of this
manual.
The folder name is
decided based on the
folder name rule here.