Owner manual

www.keyence.com
KEYENCE CORPORATION. Vision System Division
‐ 14 ‐
2
Command execution procedure
✎Command Processing Flow
There are two methods for executing a command: "PLC Terminal" and "Polling". If "Polling" is selected, terminal control is not
required but the communication for polling is required, and the command execution may be slower than "PLC Terminal".
"PLC Terminal"
Executes a command when the input terminal IN15 "PLC Terminal" is set.
"Polling"
Always monitors (polls) the data memory specified in "Command Execute Address (bit)", and executes a command when it
is set.