Owner manual
KEYENCE CORPORATION. Vision System Division
‐ 4 ‐ www.keyence.com
✎Configuring the MP Series Settings
3
2
Select "Module Configuration" on the project screen.
→ Engineering Manager starts up.
Start MPE720 with PLC connected to the computer, and select [File] > [New project]. Then enter a file name
and select a controller name to start a project.
4
Click "00", the CPU module controller No., on the "Module Configuration" screen in Engineering Manager.
Then double-click SLOT No. 2 in "Module Details".
→ A detailed seng screen for the selected module appears.
(1) Click
(2) Double-click
1
Switch the E-INIT dipswitch on the MP Series unit to ON, and start up the unit.
→The IP Address will be reset to 192.168.1.1 and the Port will be reset to 1024.