User Manual

3-3 Explicit Messaging
3-29
3
Communicating with the GT-70A series
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (GT-70A) -
Nx10+1
6D Calculation display value
*3
*6
R
6E to
83
System reserved
Nx10+2
64 Group-2 entry count R12
65 Bank 0 HIGH setting R/W +005.0000 -099.999 to +999.999
66 Bank 0 LOW setting R/W +002.0000 -099.999 to +999.999
67 Bank 0 preset value R/W +000.0000 -099.999 to +999.999
68 Bank 1 HIGH setting R/W +005.0000 -099.999 to +999.999
69 Bank 1 LOW setting R/W +002.0000 -099.999 to +999.999
6A Bank 1 preset value R/W +000.0000 -099.999 to +999.999
6B Bank 2 HIGH setting R/W +005.0000 -099.999 to +999.999
Nx10+2
6C Bank 2 LOW setting R/W +002.0000 -099.999 to +999.999
6D Bank 2 preset value R/W +000.0000 -099.999 to +999.999
6E Bank 3 HIGH setting R/W +005.0000 -099.999 to +999.999
6F Bank 3 LOW setting R/W +002.0000 -099.999 to +999.999
70 Bank 3 preset value R/W +000.0000 -099.999 to +999.999
71 to
83
System reserved
Nx10+3
64 Group-3 entry count R7
65 Key lock R/W 0
0: Unlock
1: Key lock
66 Bank switching state *7
R0 0 to 3: Currently active bank
W0
0: Switch to bank 0
1: Switch to bank 1
2: Switch to bank 2
3: Switch to bank 3
67 Timing status *8
R0
0: Timing input OFF, or in process of mea-
surement using self-timing
1: Timing input ON, or not in process of mea-
surement using self-timing
W0
0: Change during measurement
1: Change during non-measurement
68 to
6A
System reserved
6B Bar display mode R/W 0
0: Bar display mode
1: OK/NG display mode
6C to
83
System reserved
Nx10+4
64 Group-4 entry count R26
65 Calcuration mode *9 R/W 0
0: OFF
1: Maximum
2: Minimum
3: Flatness
4: Mean
5: Standard difference
6: Torsion
7: Warp
8: Thickness
66 Detection mode R/W 0
0: Standard
1: NG hold
2: peak
3: bottom
4: Peak-to-peak
67 System reserved
InstID
(DEC)
AttrID
(HEX)
Name Description Attribute
Default
value
Parameter range