Instruction Manual
14
- PROFINET Communication Unit DL-PN1 User's Manual (IL) -
*1 Functions assigned to the external input request 1 to 4 are as follows:
• External input request 1: ZERO SHIFT input
• External input request 2: RESET input
• External input request 3: TIMING input
• External input request 4: Not used
Functions assigned to the external input request 1 to 4 can be changed.
Refer to the IL series user's manual.
*2 If the judgment value is correct, the parameter range is
IL-S025/IL-030/IL-S065/IL-065/IL-100: -99.997 to 99.998
IL-300/IL-600: -999.97 to 999.98
IL-2000: -9999.7 to 9999.8
• For IL-S025/IL-030/IL-S065/IL-065/IL-100:
When the comparator value is over range, "+99.999" is stored.
When the comparator value is under range, "- 99.999" is stored.
When the comparator value is invalid, "- 99.998" is stored.
When an error occurs, "+100.000" is stored.
• For IL-300/IL-600:
When the comparator value is over range, "+999.99" is stored.
When the comparator value is under range, "- 999.99" is stored.
When the comparator value is invalid, "- 999.98" is stored.
When an error occurs, "+1000.00" is stored.
• For IL-2000:
When the comparator value is over range, "+9999.9" is stored.
When the comparator value is under range, "- 9999.9" is stored.
When the comparator value is invalid, "- 9999.8" is stored.
When an error occurs, "+10000" is stored.
Access Address (Slot 1 to 8)
192 Setting error
When the sensor amplifier
setting is abnormal, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
193 EEPROM writing
When the sensor amplifier is
reflecting the setting after the
setting change, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
194 Laser emission stop status
When the light emission of
the sensor amplifier stops,
the corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
Index
(DEC)
Function name Description
Data
type
Attribute
Value
Index
(DEC)
Function name
Description
Data
type
Attribute
Default
value
Value
0 Reserved for system
1 Zero shift execution request DINT C
2
Zero shift reset execution
request
DINT C