Instruction Manual

15
- PROFINET Communication Unit DL-PN1 User's Manual (IL) -
3 Reset request DINT C
4 Reserved for system
5 Initial reset request DINT C
6
System parameter set
request
DINT C
7 to 13 Reserved for system
14 Tolerance tuning request DINT C
15
Two-point tuning HIGH side
1st point confirmation
operation request
DINT C
16
Two-point tuning HIGH side 2nd point
confirmation operation request
(Determine HIGH setting value.)
DINT C
17
Two-point tuning LOW side
1st point confirmation
operation request
DINT C
18
Two-point tuning LOW side 2nd point
confirmation operation request
(Determine LOW setting value.)
DINT C
19
Calibration SET1
Confirmation operation
request
DINT C
20
Calibration SET2
Confirmation operation
request (Perform calibration.)
DINT C
21
Calculated value two-point
calibration SET1 Confirmation
operation request
DINT C
22
Calculated value two-point
calibration SET2 Confirmation
operation request (Perform
calculated value two-point
calibration.)
DINT C
23
Calculated value three-point
calibration SET1 Confirmation
operation request
DINT C
24
Calculated value three-point
calibration SET2 Confirmation
operation request
DINT C
25
Calculated three-point calibration
SET3 Confirmation operation
request (Perform calculated
three-point calibration.)
DINT C
26
One-point tuning request for
diff. count filter
DINT C
27
Two-point tuning 1st point
confirmation operation
request for diff. count filter
DINT C
28
Two-point tuning 2nd point
confirmation operation request
for diff. count filter (Determine
HIGH and LOW setting value.)
DINT C
29 to 31 Reserved for system
32 Group1 Entry Count DINT R 29
Index
(DEC)
Function name Description
Data
type
Attribute
Default
value
Value