Instruction Manual

5
- PROFINET Communication Unit DL-PN1 User's Manual (IL) -
 Data I/O communication device map (DL-PN1  PROFINET I/O controller)
 DL-PN1 (Slot 0)
 Input
 Sensor amplifier (Slot 1 to 8)
 Input
Address Bit Function name Description Value
0
0 Reserved for system - -
1 Reserved for system - -
2 Comparator value property Stores the comparator value status.
0: Normal
1: Disabled status
“----”, “FFFF”, or “-FFFF”
3 Reserved for system - -
4 Reserved for system - -
5 Reserved for system - -
6 Reserved for system - -
7 Error status
Stores the error status of the sensor
amplifiers.
"Types of error and error code"
(page 29)
0: No error occurred.
1: Error occurred.
1
0 External input response 1
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
1 External input response 2
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
2 External input response 3
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
3 External input response 4
Stores the external input response
to the sensor amplifier.
0: No input
1: Input reception
4 Reserved for system - -
5 Reserved for system - -
6 Reserved for system - -
7 Reserved for system - -
2 to 15 0 to 7 Reserved for system - -
Address Bit Function name Description Value
16+7(a-1)*
0 High
ON/OFF of the High state of the
sensor amplifiers is output.
0: OFF
1: ON
1Low
ON/OFF of the Low state of the
sensor amplifiers is output.
0: OFF
1: ON
2Go
ON/OFF of the Go state of the
sensor amplifiers is output.
0: OFF
1: ON
3 Reserved for system - -
4 Reserved for system - -
5 Reserved for system - -
6 Reserved for system - -
7 Reserved for system - -