Owner's manual

15
- PROFINET Communication Unit DL-PN1 User's Manual (IG) -
16
Two-point tuning (HIGH, 2nd
point) determination action request
DINT C 1
17
Two-point tuning (LOW, 1st point)
determination action request
DINT C 1
18
Two-point tuning (LOW, 2nd point)
determination action request
DINT C 1
19
Calibration SET1
determination action request
DINT C 1
20
Calibration SET2
determination action request
DINT C 1
21 to 31 Reserved for system
32 Group1 Entry Count DINT R 29
33 Sensor amplifier error state *1 DINT R
Bit0: Overcurrent Error (ErC)
Bit1: EEPROM Error (ErE)
Bit2: Head Error (ErH)
Bit3: Light transmitter/emitter
reverse connection error
Bit4: Light receiver EEPROM
error
Bit5: Light receiver error
Bit6: Light transmitter error
Bit7: Light transmitter laser
error
Bit8: Model mismatch error
Bit9: Head error (standard
waveform registration)
Bit10: Standard waveform
registration error 1, 2, 3, 4
Bit11: Communication error
Bit12: Expansion error
Bit13: Calculation error
34 to 35 Reserved for system
36
Judgment output / Edge
check output
*2 DINT R
Bit0: HIGH judgment output
0: OFF, 1: ON
Bit1: LOW judgment output
0: OFF, 1: ON
Bit2: GO judgment output
0: OFF, 1: ON
Bit3: Edge check
0: OFF, 1: ON
37
Current value (P.V. value)
*3
*4
DINT R -99.999 to +99.999
38
Raw value (R.V. Value)
*3
*4
DINT R -99.999 to +99.999
39
Peak-hold value in hold mode
*3
*4
*5
DINT R -99.999 to +99.999
40
Bottom-hold value in hold
mode
DINT R -99.999 to +99.999
41
Calculation value (CALC
Value)
*3
*4
*6
DINT R -99.999 to +99.999
42 Analog output value *7 DINT R
Analog voltage output:
-5.000 to +5.000
Analog current output:
+04.00 to +20.00
43 to 44 Reserved for system
45 Number of edges *8 DINT R 0 to 99
Index
(DEC)
Function name Description
Data
type
Attribute
Default
value
Value