User guide

17
- PROFINET Communication Unit DL-PN1 User’s Manual (SK-1000) -
*1 The error content of the sensor amplifier can be checked by noting the ON/OFF
state of each bit.
OFF (0): No error; ON (1): Error
More than one error may occur simultaneously. For details of each error, refer to the
SK-1000 Series instruction manual.
*2 Details of output status can be checked by noting the ON/OFF state of each bit.
*3 Use this parameter in combination with the judgment value property or with the
judgment value "invalid," "over," or "under."
If the judgment value is correct, the parameter range is
from - 99.997 to +99.999 (SK-050).
When the comparator value is over range, "+99.999" is stored.
When the comparator value is under range, "- 99.999" is stored.
When the comparator value is invalid, "- 99.998" is stored.
When an error occurs, "+100.000" is stored.
*4 - When in sample hold: Value "-99.998" is output.
- When not in sample hold: The peak value encountered during the sampling period
is output.
*5 - When in sample hold: Value "-99.998" is output.
- When not in sample hold: The bottom value encountered during the sampling
period is output.
*6 This is -999.8 when the temperature is not acquired correctly.
155 to
159
Reserved for system
160 Group5 Entry count DINT R 4
161 Distance correction method DINT R/W 0
0: Initial state
1: User setting
162
Near-side distance correction
amount
DINT R/W 25 5 to 50
163
Far-side distance correction
amount
DINT R/W 100 60 to 120
164 Area scaling DINT R/W 1.00 0.10 to 1.50
165 to
191
Reserved for system
192 Group6 Entry count DINT R 11
193 Product code DINT R 4022
Main unit:=4024
Expansion unit:=4025
194 Reserved for system
195 Connected sensor head DINT R 0
0: Not connected
1: Connected
195 to
199
Reserved for system
200 Product name 1 *18
DINT/
STRING
R
Main unit:="SK-1"
Expansion unit:="SK-1"
201 Product name 2 *18
DINT/
STRING
R
Main unit:="000/"
Expansion unit:="050/"
202 Product name 3 *18
DINT/
STRING
R
Main unit:=""
Expansion unit:=""
203 Product name 4 *18
DINT/
STRING
R
Main unit:=""
Expansion unit:=""
204 to
223
Reserved for system
Index
(DEC)
Function name Description
Data
type
Attribute
Default
value
Value