Manualshelf

Owner's manual

ManualsBrandsKEYENCE ManualsLightingGL-RHG Series
61626364656667686970
3-7 Mounting Brackets
3-18
GL-RHG-M-NO3-E
Installation to a Machine
3
Straight mounting bracket (GL-RB11) / L-shaped mounting bracket (GL-RB12)
Point
If the length for a single GL-RHG unit is 1280 mm or greater, use the following antivibration
bracket additionally as an intermediate support bracket.
• If you use Straight mounting bracket, use Antivibration bracket for the straight mounting
bracket.
• If you use L-shaped mounting bracket, use L-shaped mounting bracket as an antivibration
bracket.
For more information about the mounting position, see "Dimensions" (page 7-10)
1 Insert the mounting bracket into the GL-RHG along the groove on the back side, as shown in the
following image.
Straight mounting bracket
L-shaped mounting bracket
2 Secure the mounting bracket to the GL-RHG with hexagon socket bolt on the back side.