Owner's manual

4-5 Examples of Wiring
4-14
GL-RHG-M-NO4-E
Wiring
4
 Transmitter: 11-core cable, Receiver: 11-core cable, EDM input not used
(1) PNP output cable
(2) NPN output cable
P1
P2
L1
R1 R2
PLC
*1 When not using the reset input to reset from an error condi-
tion, insulate the yellow wire of the receiver.
(Muting input 2) Red/Black
(Muting input 1) Pink
(Override input) Yellow
(Muting lamp output) Red
(FE) Grey
(0 V) Blue
(Wait input) White
(Error output) Black
(+24 V) Brown (+24 V) Brown
(OSSD1) Black
(OSSD2) White
(0 V) Blue
(FE) Grey
(AUX output) Red
(EDM input) Red/Black
(Reset input) Yellow
(Not in use) Pink
*2 PNP output
Brown Blue
Black
*2
S3
S2
S1
*1
Orange (Synchronization 1)
Orange/Black
(Synchronization 2)
Brown Blue
Black
*2
Transmitter
Receiver
P1
P2
L1
R1 R2
PLC
*1 When not using the reset input to reset from an error condi-
tion, insulate the yellow wire of the receiver.
(Muting input 2) Red/Black
(Muting input 1) Pink
(Override input) Yellow
(Muting lamp output) Red
(FE) Grey
(0 V) Blue
(Wait input) White
(Error output) Black
(+24 V) Brown (+24 V) Brown
(OSSD1) Black
(OSSD2) White
(0 V) Blue
(FE) Grey
(AUX output) Red
(EDM input) Red/Black
(Reset input) Yellow
(Not in use) Pink
*2 NPN output
Brown Blue
Black
*2
S3
S2
S1
*1
Orange (Synchronization 1)
Orange/Black
(Synchronization 2)
Brown Blue
Black
*2
Tra ns mit te r
Receiver