User guide

4-5 Calibration Function
4-54
4
Setting Various Functions
IG-E
Setting Method 2 (Two-point Calibration)
Main screen
1
Press [MODE] button and
X
button for approx. 2
seconds on the main screen at the same time.
[.END] is displayed on the main display (upper level).
[MODE] + X button
2 seconds or more
at the same time
2
Press
S
/
T
button to set [
WUT
] and press
X
button.
X button
3
Press
S
/
T
button to set "R.V. (1) you wish to display" for [
UGV
].
[UGV] and the current internal measurement value (R.V.) are
displayed alternately on the main display (upper level).
4
Press the [SET] button while the "R.V. (1) before
correction" is displayed on the main display (upper
level). (SET 1 Confirmation operation)
After [UGV] blinks on the main display (upper level) several
times, [UGV] is displayed.
[SET] button
5
Press
S
/
T
button to set "R.V. (2) you wish to
display" for [
UGV
].
[UGV] and the current internal measurement value (R.V.) are
displayed alternately on the main display (upper level).
6
Press the [SET] button while the "R.V. (2) before
correction" is displayed on the main display (upper
level). (SET 2 Confirmation operation)
After [ UGV ] blinks on the main display (upper level) several
times, the setting is complete and the main screen is restored.
[SET] button
Reference
• When W button is pressed, the display returns to the previous screen.
• When the [MODE] button is pressed or both the [MODE] button and X
button are continuously pressed at the same time, the setting is canceled
and the main screen is restored.
• When X button is pressed in step 5, the setting is canceled and the main
screen is restored.

LASER
BANK
0
1
2
3
HI
GO
LO
R.V.
ANALOG
HI SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT

HOLD CALC CHECK
F'(.6
LASER
BANK
0
1
2
3
HI
LO
R.V.
ANALOG
HI SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT
%.D
GO
HOLD CALC
CHECK
Calibration setting
Setting value Description Default value
FGHNV
Standard
c
WUT
User setting

LASER
BANK
0
1
2
3
HI
GO
LO
R.V.
ANALOG
HI SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT
5'6
HOLD CALC CHECK
Set the value you wish to display
Item Setting range Default value
UGV -99.999 to 99.999 0.000

LASER
BANK
0
1
2
3
HI
GO
LO
R.V.
ANALOG
HI SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT
5'6
HOLD CALC CHECK
Set the value you wish to display
Item Setting range Default value
UGV -99.999 to 99.999 5.000
Main screen