User guide

4-1 Setting Operations
4-3
IL-E
4
Setting Various Functions
Functions Available after the Display Changes to Each Setting Screen
Main screen
Press [MODE] button for approx. 2 seconds.
4-2 Basic Settings and Advanced Settings (page 4-4)
Basic settings
Basic settings such as measurement mode, response time.
Advanced settings
More advanced settings such as hold function, delay timer
enable the unit to be used in wider applications.
Press [MODE] and W buttons for approx. 2 seconds.
4-3 Calculation Function (page 4-42)
The internal measurement value (R.V.) made as a result of a
calculation between two sensor amplifiers (addition or
subtraction).
Press [MODE] and X buttons for approx. 2 seconds.
4-4 Calibration Function (page 4-45)
When there is a difference between the internal
measurement value (R.V.) or calculated value (CALC value)
and the actual dimension of the object, the value can be
corrected.
While pressing the [MODE] button, press the [SET] button 5
times.
3-3 Initial Reset (Initialize) (page 3-8)
All settings, excluding the calibration function, are initialized.

LASER
BANK
0
1
2
3
HI
GO
LO
R.V.
ANALOG
HI SHIFT
ZERO SHIFT
TIMING
LO
ALIGNMENT

HOLD CALC CHECK