User guide

4-2 Basic Settings and Advanced Settings
4-41
IL-E
4
Setting Various Functions
Near measurement center
IL-S025 : 25 mm ± 0.25 mm
IL-030 : 30 mm ± 0.25 mm
IL-S065/IL-065 : 65 mm ± 0.5 mm
IL-100 : 100 mm ± 1 mm
IL-300 : 300 mm ± 7 mm
IL-600 : 600 mm ± 20 mm
IL-2000: 2000 mm ± 50 mm
*1 When the analog output of the main unit is set to OFF, or the expansion unit is operating, the
indicator turns on if the following distances are detected.
IL-S025: 25 ± 5 mm
IL-030: 30 ± 5 mm
IL-S065/IL-065: 65 ± 10 mm
IL-100: 100 ± 20 mm
IL-300: 300 ± 140 mm
IL-600: 600 ± 400 mm
IL-2000: 2000 mm ± 1000 mm
*2 If GO is set to red with "18. Display color", the green LED and red LED lighting methods will
be reversed.
*3 The position of the display light (CENTER/A.RANGE) of the IL-S025/IL-S065/IL-2000 is
different from that of above.
The LED color of the judgment indicator is set. The display color for the main display (upper
part) can be set at the same time only for the panel mount type amplifier (IL-1500/IL-1550).
“3-4 Setting the Tolerance Setting Value” (page 3-10)
CENTER
A.RANGE
LASER
IL-030
(1) Reference distance indicator
*3
(2) Analog range indicator
*3
(3) Laser radiation emission indicator
18. Display Color
%Q.
Display color
DIN rail mount type
(IL-1000/1050)
Panel mount type
(IL-1500/IL-1550)
Default
value
Judgment indicator Judgment indicator Main display
GO Green
HI: Red
GO: Green
LO: Red
HI: Red
GO: Green
LO: Red
GO: Green,
otherwise: Red
c
GO Red
HI: Green
GO: Red
LO: Green
HI: Green
GO: Red
LO: Green
GO: Red, otherwise:
Green
Always Red
HI: Red
GO: Red
LO: Red
HI: Red
GO: Red
LO: Red
Always Red display