Instruction Manual

1-5
- IV Series User’s Manual (Field Network) -
Overview of IV Series
Operation of the indicator light
Details on operations of the indicator light are
shown below.
1 2 3
4 5
1 PWR/ERR
Indicates the power supplying status to the
sensor and the error status of the sensor.

Green (ON)
...... Operating.

Green (Blink)
.... Setting processing. Operation
is stopped. Blinks once a
second.

Red (ON)
.......... Unrecoverable error has
occurred.

Red (Blink)
....... Recoverable error has
occurred.

Orange (Blink)
... Flash LED has been required on
the PROFINET communication
I/O controller. Blinks 4 times
with a period of about a second.

(OFF)
............... Power is not supplied.
Adjusting the focusing position
( manual focus only).
2 OUT
Indicates the comprehensive result.

Green
............... Comprehensive result is “OK”.

Red
.................. Comprehensive result is “NG”.

(OFF)
............... Setting processing.
Standby status until the rst
judge nishes after starting the
operation or after switching
the program number.

Orange (Blink)
... Indicates the focusing status
while adjusting the focusing
position with the blinking speed
(manual focus type only).
Flash LED has been required on
the PROFINET communication
I/O controller. Blinks 4 times
with a period of about a second.
3 TRIG
Green light lights up (one-shot) according to
input of the internal or external trigger.

Orange (Blink)
... Flash LED has been required on
the PROFINET communication
I/O controller. Blinks 4 times
with a period of about a second.
4 STATUS
Indicates the connecting status to the PC.

Green (ON)
...... Normally connected with monitor,
PC, EtherNet/IP communication
scanner, or PROFINET
communication I/O controller.

Green (Blink)
.... IP address has been retrieved
but the sensor is not correctly
connected with monitor, PC,
EtherNet/IP communication
scanner, or PROFINET
communication I/O controller.

Red (Blink)
....... Timeout has occurred at the
communication with EtherNet/
IP communication scanner.

Red (ON)
.......... IP address coincides with
another device.

(OFF)
............... IP address is not assigned.
Not correctly connecting with
PC.

Orange (Blink)
.. Indicates the focusing status
while adjusting the focusing
position with the blinking speed
(manual focus type only).
5 LINK/ACT
Indicates the linking status within PC or
Ethernet switch.

Green (ON)
...... Normally linked.

Green (Blink)
.... Normally linked, and the data
is sending/receiving.

(OFF)
............... Sensor is not normally linked.
1
Getting Started