Owner manual

Chapter

Environment Settings

E LT-9001-IM

6-5

Performs settings for the communication specifications of the RS-232C interface.

The settings of the RS-232C interface varies depending on the devices to be

connected or the contents to be output.

Refer to "Chapter 8 RS-232C" (page 8-1) for details.

Items that can be set

Reference

RS-232C Interface

Item Description

Baud rate Sets the speed at which the data is transmitted.

[BAUDRATE] Select one among 9600, 14400, 19200, 38400, 57600, and 115200 bps.

Parity check Sets the type of the parity check. Select one among [NONE], [EVEN],

[PARITY] and [ODD].

Stop bit Sets the length of the stop bit. Select 1 bit or 2 bits.

[STOPBIT]

Data length Sets the number of characters. Select 7 bits or 8 bits.

[D-LENGTH]

Data mode Sets the mode of data transmission by synchronous output

[D-MODE] (output of the measured value by TIMING input).

Select one among [OFF], [S0], [S1], and [S2].