Owner manual

2
Chapter
Basic Operations
2-27
E LT-9001-IM
The default values and setting range of the LT-9001 parameters are listed below.
Default Values and Setting Range
Setting contents
Setting range
Default value Notes
Lower limit Upper limit
Dark
Setting range of [HI] 1 255 100
LO<HI
Setting range of [LO] 0 254 20
Mask
Setting range of [HI] – 1500 + 1500 + 400
Setting range of [LO] – 1500 + 1500 – 400
Light intensity level 0 255 30
Display
Upper limit – 9999.99 + 9999.99 + 1000.00
Lower limit<Upper limit
Lower limit – 9999.99 + 9999.99 – 1000.00
Tolerance
Upper limit – 9999.99 + 9999.99 + 6000.00
Lower limit<Upper limit
Lower limit – 9999.99 + 9999.99 – 6000.00
Offset Offset – 9999.99 + 9999.99 0.00
Analog
Analog + 10V – 9999.99 + 9999.99 + 200.00
– 20.00
Analog – 10V – 9999.99 + 9999.99 – 200.00
Measured value of the 1st point
– 9999.99 + 9999.99 0.00
( < and < )
Calibration
Calibrated value of the 1st point – 9999.99 + 9999.99 0.00
and (0.5 Span value after the
Measured value of the 2nd point – 9999.99 + 9999.99 + 100.00
calibration is done<4.0000)
Calibrated value of the 2nd point – 9999.99 + 9999.99 + 100.00
1
1
2
3
4
2
1
2 43
1
2
||