Instruction Manual

1-8

N-410 Overview

1-3 Part Names

 BL-U1

Number Name Function

1OK/NG LED

•Illuminates green when output is OK.

•Illuminates red when output is NG.

2 Timing LED Illuminates when trigger input is on.

Communication state

display LEDs

Monitors the state of communications at the RS-232C port.

From top to bottom: SD, RD, RS, CS

4 Power LED Illuminates when power is on.

5 Input/output terminal

There are terminals for trigger input, OK/NG output, RS-422A and

RS-485.

6 Power switch Turns the power on or off.

7 Power cable (2m) Use 100 to 240 V AC(50 / 60 Hz).

8 RS-232C port Connects to the computer. Not used for multi-drop connections.

9 Reader port Connects to BL/SR/RF Series devices.

10 Dipswitch Changes communication ports, toggles the terminator.

1. OK/NG LED

2. Timing LED

3. Communication

state display LEDs

4. Power LED

5. Input/output terminal

9. Reader port

8. RS-232C port

6. Power switch

7. Power cable(2m)

10. Dipswitch