Instruction Manual

N-410 Settings
3
3-12
3-3 Using Terminal and Test Mode
The AutoID Navigator includes "Terminal" and "Test Mode" to confirm that the N-410 is sending data
normally. For more information on using AutoID Navigator, refer to the "AutoID Navigator
User's Manual".
The section explains how to AutoID Navigator to connect to the N-410.
 Using Terminal
1 Click the [Update connection] button to confirm the connection to the N-410.
2 Select [Terminal] under [Project].
The terminal screen appears.
3 When the BL/SR/RF Series devices connected to the N-410 read data, that data will be
displayed on the screen.
4 Enter a command into the command field of the screen using the keyboard. That command will
be transmitted to the BL/SR/RF Series devices and the N-410.
The format of the command sent will be displayed in the "Check command" field.